Ελληνικά 
English 
Kamatzis SA was founded in 1983 and is based in Doko, Chalkida, in privately owned buildings of 12,000 sq.m. , placed in an area of 27 acres . The company began its activity with the production of ice cubes and then expanded into the logistics sector. It then became active in the production of expanded polystyrene (EPS) packaging products and in the manufacturing of insulating materials. Kamatzis SA is also active in the field of refrigeration, having 20,000 m3 cold storage rooms , with a capacity of 10,000 tons , numbers that rank the Company in first place in industrial refrigeration in Evia region.
The project consisted of following: Heavy-duty/industrial sliding AMP doors 3000 x 3000 electrically operated with oil floor heating, frame and counter frame for 150mm thick panels.
Thank you Giorgos Klimentidis, General Manager at Kamatzis SA.
The advantages of AMP electric sliding doors for chiller & freezer cold rooms
Our experience in combination with the excellent quality german raw materials & state-of-art latest technology equipmen t & handmancraft allow us to manufacture doors of high endurance & thermal insulated according to the European HACCP regulations and with the necessary CE certifications.
Automatic activation
Automatic activation of Amp sliding door via a mechanism with a motor connected to a multifunction panel. Switchgear IP 56 is suitable for installation in a moist environment and includes an electronic circuit for controlling the functions and an inverter to control the paths during operation of the opening-closing and the necessary needs in electrical power in respect to the security settings.
Settings
Ό All automation system is pre-cabled therefore the connection of the board becomes easy through a multipolar connector which is located at the bottom of the board. There are already pre-installed factory settings which are easily changed depending on the needs of each user.
Speed
Speed is set to 0,27 m/sec (as per regulations) and the engine has a reversible reducer. The speed can change easily from the board.
Safety
The primary safety device for crash protection is a sensitive bar resistant located on the vertical edge of the Amp door panel, which in case of impact with an obstacle, automatically stops the door and reverses motion. Controls
The controls of the STOP (end of movement) during the opening and closing is activated by a micro switch. The transmission is through a chain with adjustable power and not with tapes for cost reasons with breakage problems.
Signals
A yellow light is flashing signals when Amp door is in motion. Besides the many arrangements for opening – closing the door from the board, two cords connected to switches are placed in front and behind the door (at desired distances) to facilitate the operator of the forklift at the entrance and exit of the cold room.
Power failure
In case of power failure Amp door is operated manually.
Gallery
